Scott announce all-new Spark and Scale bikes

Scott have announced an all-new Spark platform which will support three different bikes, Spark RC, Spark and Spark Plus. The Spark is a completely new bike and you don't need to look further than the suspension design to see that. The old top link design has being replaced with a spanking new single-pivot rocker link system. Scott have been aggressive with their implementation of new technologies on the Spark: boasting cutting edge carbon construction techniques, bringing the geometry up-to-date, the use of new standards like Boost and metric shocks, and even adapting the brake mounts for more flexible stays.

Scott Spark RC 900.jpg
Scott Spark RC 900 SL

 

Three new Scott Spark models


There are three new Scott Spark bikes with 33 models across the range. Each Spark bike has its own distinct purpose but with a shared DNA.

 

New Scott Spark models.jpg

 

The Spark RC is a 100% race dedicated 100mm full suspension bike. The Spark is a do-it-all marathon-trail bike featuring a slacker geometry and 120mm travel. While the Spark Plus is a trail ready full suspension 27.5 plus bike.

 

Wheel size


Both the Spark RC and Spark will be available as 27.5" and 29" models. The 27.5" models are in the 700 series while the 29" bikes are designated the 900 model number. The Spark Plus is based around a 27.5" plus sized wheel. The 27.5" models will be available in S / M / L sizing while the 29" and 27.5" Plus bikes will included an XL size.

 

Engineers don’t like design compromises. Splitting the Spark family into three models allowed us to create bikes with a shared DNA and distinct purpose. The Spark RC is a 100% race dedicated full suspension bike - by designing a 1x specific platform and using HMX-SL fibres for the first time on MTB we’ve set a new benchmark in terms of weight. The final bike is the result of hundreds of careful design decisions which combine to create the perfect racing tool for our racers to keep on winning. Dan Roberts - Scott Engineer

 

Scott Spark RC


The new race inspired RC (Racing Concept) family includes all options - hardtail or full-suspension, and 27.5” or 29” wheel size geometries. All RC models come with 100mm of travel.

 

Scott Spark RC 900 World Cup.jpg
Spark RC 900 World Cup

 

The Spark RC is a 100% race dedicated full suspension bike. Designed specifically for 1x and using HMX-SL fibres the frame weighs an impressive 1749 grams on the Spark RC 700 SL (with shock). Geometry on the Spark 700 sees a major shift with the head angle slackening to 68.5 degrees, reach growing, chain stay length shrinking and standover heigh dropping.

 

Scott Spark


Spark 900 Premium_PL_Detail Image_2017_BIKE_SCOTT Sports_01.jpeg
Spark 900 Premium

 

Scott see the new Spark as a "do-it-all marathon trail bike" giving diversified riders a bike suitable for race day as well as trail exploration. Unlike the RC models, the Spark will have the option of a 1x or 2x drivetrain. From the specification choices it is clear that Scott are serious about the Spark's trail credentials with stiffer forks and dropper posts making an appearance on most models.

 

Scott Spark Plus


Spark 700 Plus Tuned_PL_Detail Image_2017_BIKE_SCOTT Sports_01.jpeg
Spark 700 Plus Tuned

 

The Spark Plus is a trail focussed bike built around 120mm rear and 130mm front travel and big tyres. Scott were relatively early adopters of the 27.5" plus wheel and have always believed that the 2.8" tyres provide the best size to balance performance and fun.

 

Scott Spark Platform explained.jpg

 

Scott Spark Models


Scott Scale Models.jpg

 

Local model availability and pricing still need to be confirmed. The first stock is expected to land in August.

 

Scott Spark RC


Scott Spark RC 900.jpg
SPARK RC 900 | 700 SL

Scott Spark RC 900 700 Ultimate.jpgSPARK RC 900 | 700 ULTIMATE

Scott Spark RC 900 700 World Cup.jpgSPARK RC 900 | 700 WORLD CUP

Scott Spark RC 900 700 Pro.jpgSPARK RC 900 | 700 PRO

 

Scott Spark


Scott Spark 900 700 Ultimate.jpg
SPARK 900 | 700 ULTIMATE

Scott Spark 900 700 Premium.jpgSPARK 900 | 700 PREMIUM

Scott Spark 900 700.jpgSPARK 900 | 700

Scott Spark 910 710.jpgSPARK 910 | 710



Scott Spark 920 720 .jpgSPARK 920 | 720

Scott Spark 930 730 .jpgSPARK 930 | 730

Scott Spark 940 740 .jpgSPARK 940 | 740



Scott Spark 945 745 .jpgSPARK 945 | 745

Scott Spark 950 750.jpgSPARK 950 | 750

Scott Spark 960 760.jpgSPARK 960 | 760

 

Scott Spark Plus


Scott Spark 700 Plus Tuned.jpg
SPARK 700 PLUS TUNED

Scott Spark 710 Plus.jpgSPARK 710 PLUS

Scott Spark 720 Plus.jpgSPARK 720 PLUS

Scott Spark 730 Plus.jpgSPARK 730 PLUS

 

Contessa Spark


Contessa Spark RC 700.jpg
CONTESSA SPARK RC 700

Contessa Spark 700.jpgCONTESSA SPARK 700

Contessa Spark 710.jpgCONTESSA SPARK 710

Contessa Spark 720.jpgCONTESSA SPARK 720


Contessa Spark 730.jpgCONTESSA SPARK 730

Contessa Spark 710 Plus.jpgCONTESSA SPARK 710 PLUS

Contessa Spark 720 Plus.jpgCONTESSA SPARK 720 PLUS

 

The New Scott Scale


The Scott Scale hardtail has also been revamped with similar design concept changes as the new Spark. Scott claim that they have produced the lightest, stiffest and most comfortable Scale yet.

 

Scale RC 900 SL_PL_Detail Image_2017_BIKE_SCOTT Sports_01.jpg
Scale RC 900 SL

 

Like the Spark, the Scale RC has seen new fibres and construction methods introduced to lighten and stiffen the frame. The new Scale frame weighs in at 849 grams. The frame also assists in rider comfort with Scott's new SDS2 technology providing controlled flex in areas that increase rider comfort and absorbs vibrations without sacrificing on pedalling efficiency.

 

In today's market it's getting easier for anyone to go to Asia and release a mediocre carbon hardtail frame and call it good. That`s where we are different. Focussing passionately on every little detail, no matter how small the gain is really sets us apart from everybody else, and puts the new Scale firmly ahead of the competition. Dan Roberts - Scott Engineer

The Scale RC provides for only a 1x drivetrain with other Scale models allowing 2x configurations as well. Other features like Boost axle spacing, an axle anchored rear brake mount for stay flexibility, internal cable routing and integrated chain guide also make their way over from the Spark to the Scale.

 

Nino Scale_Spyshot_PL_Detail Image_2017_BIKE_SCOTT Sports_2.jpg

 

The new Scale has seen significant geometry changes. For example, the 29er geometry has been updated with a 13mm shorter chain stay to sharpen the handling and also to guarantee traction and a centered rider position on the bike the 900 series has also a 1.1° steeper seat tube angle which helps to maintain the riders weight balance be- tween the wheels. As a result the reach grew by 17mm, while keeping the toptube length the same. Stack height has also been reduced, allowing more and lower possibilities for handlebar positioning.

 

The Scale also has a Plus sized bike in it's ranks. The Scale Plus features a 120mm travel fork with 2.8" plus tyres.

 

Scale 710 Plus.jpg
Scale 710 Plus.

 


Spark Frame Technology


Over the years, the R&D experts at SCOTT have learned a lot when it comes to carbon engineering. For the 2017 generation, we've used our expertise to not only create super high-end carbon frames, but rather to apply our knowledge of ultra-lightweight carbon construction also for all existing levels of carbon frames that we offer.

 

In terms of carbon evolution, our carbon experts started over from zero for the Spark project. We not only use new carbon fibres. We now also have more complex and intelligent shapes for the layers. Plus we broke our frame build-up into more pieces which results in a higher complexity of the frame.

 

Three material levels can be found in SCOTT’s carbon bike range - HMX- SL, HMX and HMF. With the new lay-up process, all carbon bikes become lighter, and stiffer.

 

2017 Spark Frame weights.jpg

 

Lay-Up Types used by Scott

 

HMX-SL uses the highest performance fibres currently available. MR70 is a new introduction to our layup collection. The raw fibre undergoes an extended refinement process to reach extremely high levels of strength with good stiffness. To further boost frame stiffness, tapes of the exceptionally stiff YS60 fibre are applied strategically. Fibres impregnated with a nano resin are employed in some areas of the frame. This specialist resin boosts matrix strength perpendicular to and o axis o the fibre direction to toughen the structure.

 

HMX: SCOTT has improved upon the now conventional high modulus carbon fiber, HMF, used throughout the bicycle industry. HMX is a fiber blend used by SCOTT, and is 20 percent stiffer than its HMF counterpart for the same weight. This unique material allows SCOTT engineers to create incredibly light bikes with excellent riding characteristics. The cost of HMX, however, is three times that of HMF, and is therefore reserved for our high end frames.

 

HMF carbon fiber is used to maximize strength and to keep weight low. This material has an optimal blend of stiffness and strength that offers the best riding session. SCOTT’s engineering know-how is utilized in order to create the perfect lay-up with regards to orientation and fiber size. HMF fiber offers superior strength compared to the industry standard.

 

Drivetrain Optimizations


Scott Spark Drivetrain optimizations.jpg

 

When the components evolve, bike frames can be made to take full advantage from the characteristics of the new products. Following this idea and in response to different requests coming from the riders we’ve engineered two different frames: one that accommodates only a single chain ring and one for the more traditional double chain ring setup. The single chain ring setup is considered most appropriate for racers and riders that are looking for pure performance so this 1X specific de- sign is used on the HMX-SL and HMX frames.

 

Scott Spark model drivetrain setup.jpg
Appealing more broadly to enthusiasts and casual riders, the HMF frame series has been designed for 2X set-ups but can easily accommodate a single chain ring configuration while maintaining a clean look.

 

The main feature of the single chain ring design consists not only of the removal of the front derailleur mount on the frame and the related weight savings but especially of the opportunity to redesign the chain stay and seat tube with a symmetric shape.

 

Without the derailleur and small chain ring, there’s more clearance be- tween the crank set and the rear tire. Following the same logic behind Boost technology this allows us to increase even more the cross-section of the chain stay tubes that, together with the down tube, represent the core of the structures stiffness.

 

While the previous Spark utilized the E-Type FD mount, the Spark uses the new High direct mount FD for its 2X versions. Thanks to the High direct Mount FD and Boost, we are able to engineer a wider Main Pivot and bigger chain stays.

 

On the Spark RC frames the benefits are even greater thanks to 1X design. We can build the frame in this area even stiffer. There are no FD clearance constraints.

 

Scott Scale rear triangle.jpg

New rear triangle


The rear triangle of the previous Spark consisted of 18 separate parts. The new rear triangle is constructed from a single left and right hand moulded carbon part, plus a separate brake mount. We use less metal, with fewer joints, and less hardware. Thanks to the new simplicity of the construction, we save 130g.

 

New brake mount


The key to designing such a simple rear triangle was maintaining a fully tubular construction, without a pivot in the dropout area.

 

Spark 900 Premium brake mounts.jpg

 

To allow the seatstays to flex freely as the suspension compresses, we’ve introduced a specific brake mount anchored directly to the chain stay and the wheel axle. Thanks to this solution the carbon structure is clean- er and lighter and the flexion of the rear triangle on the brake side is not inhibited. The brake mount is available in two versions, one for 160mm rotors and one for 180mm.

 

Rocker link


The Spark carbon linkage is constructed with a compression mould- ing process. It’s 37g lighter than the aluminium equivalent and half the weight of the previous Spark linkage. Making the link in two pieces means all excess material can be removed from the inside of the linkage, without sacrificing stiffness.
  • SPARK RC CARBON LINK 77G
  • SPARK RC ALLOY LINK 114G
  • MY16 SPARK ALLOY LINK 145G
Scott Scale pivotless swingarm.png

Pivotless swingarm


The pivotless swignarm design enables the rear triangle to be moulded in two continuous tubular carbon parts saving considerable weight.

 

Metric Shock and Trunnion Mount


We have adopted the new Metric shock sizing standards with a Trunnion mount. Since the shock body now extends between the two lower mounting bolts, our suspension partners have more design space. This means the shock has more stroke for the same eye to eye length. Stroke on the 165mm eye to eye shock has increased from 38mm to 40/45mm. The Trunnion standard also offers structural gains. The shorter shock enables us to build a very compact frame and shock package, which integrates tightly to the seat tube.

 

Scott Scale Trunnion Mount.jpg

 

We managed to have a very tiny yet stiff linkage- lighter than ever. Thanks to the Trunnion mount construction, stand over height on the new Spark is very low. We are still able to realize a super compact full- suspension frame and provide the ability to mount both a small and big water bottle.

 

The Spark family maintains the 165mm eye-to-eye shock length of the previous Spark 900 (our shortest shock), but realises up to 7mm more shock stroke.

 

All Spark RC and most Spark and Spark Plus bikes utilize the FOX Nude shock, specially made for SCOTT:

  • 165mm Metric Trunnion shock
  • 40mm (100mm travel RC Spark line-up) vs. 38mmm (old Spark)
  • 45mm (120mm travel Spark line-up)
By turning the Trunnion shock upside-down, we can fully integrate it into the frame which results in several benefits.

 

Since the Trunnion mount is the same width as the down tube and main pivot, we can have a very clean frame design in this critical area. The lack of tight transitions and small details allows for an efficient, continuous carbon structure. Carbon material added to reinforce the shock mount also stiffens the connection between the down tube, main pivot and bottom bracket, a key stiff ness path.

 

The flipped shock also lowers the frame’s center of gravity helping to give a more planted feel when riding.

 

Unsprung mass is reduced since it is the lighter part of the shock, connected to the linkage, not the heavier body which must move during an impact – the suspension system can react faster.

 

Our TwinLoc remote cable can be routed cleanly into the down tube.

 

Asymmetric design


The Spark down tube shock and linkage are clearly asymmetric, when looking from the top of the bike. Carbon fibres achieve their full potential when used in smooth straight lines. O setting the shock slightly to the left hand side of the bike gives a clean and continuous structure from the down tube through the shock mount to the main pivot.

 

Boost Technology

 

Boost is a hub and drivetrain standard developed by SRAM. Boost is built around a wider rear and front hub and enables stiffer wheels due to a wider spoke bracing angle. Boost 148 rear hubs move each flange of the rear hub three millimeters wider. Boost is designed as a complete system so drive- train performance isn’t compromised. Even though Boost pushes the cogs three millimeters outboard, the crankarm Q-Factor remains the same as the Boost system’s crankset utilizes front chainrings that sit a correspond- ing 3mm outward to ensure the required chainline. Boost cranks can only be used when paired with a 148mm hub. On the front the hub spacing is increased by 10mm to 110mm.

 

Scott Scale Boost.png

 

Increased wheel stiffness and greater clearance for bigger tires are the main advantages of Boost technology. On the Spark project, we wanted to go beyond the basics and reap all the benefits of this innovation by optimizing frame design and geometry.

 

The 3 mm outboard chain ring adds clearance in the chain stay area that allows a substantial increase of the chain stay tube cross-section. Correspondingly, the stiffness in this part of the frame improves.

 

Also, with a wider range of positions for the rear wheel, the frame geometry can be adjusted. We can shorten the chainstays for more agile handling.

 

Suspension Technology


Single-pivot Rocker Link Design


Scott Scale Single pivot rocker link design.jpg
For the new generation of Sparks, our goal was to develop an extremely light suspension system without compromising suspension performance. We changed from a single pivot top link design to a rocker link layout, allowing us to achieve suspension characteristics that weren’t possible with the previous design. With two years in the making, our engineers now realized a single-pivot based full-suspension frame, which we believe will help riders to boost their performance regardless of their intended use. We wanted to create a full-suspension bike which is more than just light and stiff - we wanted to build a bike which is also capable, and more versatile than ever before.

 

Thanks to the prevalence of 1x drivetrains, we have been able to increase the main pivot height to deliver perfect power transfer which will make it easy to punch up technical climbs.

 

Moving from our old platform to the new, single-pivot system has multiple reasons. Today, we believe a single-pivot system is the way to go in order to provide the best kinematic plus a superlight and stiff frame. We can build the new Spark with an unmatched stiffness-to-weight ratio. Less pivots also mean less maintenance, and even more importantly: a more sensitive riding performance. The layout allows us to design a lighter frame as shock forces are now transferred into the already reinforced main pivot and bottom bracket area. The top tube no longer has to with- stand shock loading so it can be lightened.

  • Realize the lightest full-suspension lay-out to date, 1749 grams (Spark RC 700 SL, with shock)
  • Create the shortest shock-package possible
  • Achieve a superb kinematic with an optimized suspension curve
  • Offer a system with best bump sensitivity and bottom-out resistance as well as good mid-stroke support

Suspension Curve: More sensitive, more support, better end-progression


Scott Spark Leverage ratio.jpg
The new layout offers better overall suspension performance. We can achieve a more consistent leverage ratio which transfers less force to the shock as the suspension compresses. This means the suspension is more sensitive at the beginning of travel, where small bump sensitivity is critical, but offers more support from sag point onwards, which is important for good pedalling and cornering response.

 

Traction Mode: 2-position air volume adjustment; 20% reduced wheel travel


Our 2-Position Air Volume Adjustment is the system that allows us to attain two unique spring curves for Nude equipped bikes. The Twinloc lever opens or closes a second air chamber inside the shock creating two unique geometry and travel modes. In Traction mode, a single chamber is used, there is less air spring volume leading to less sag, a more agile geometry and shorter travel - ideal for climbing. In descend mode both chambers are employed, the air spring volume increases allowing the bike to sag into a slacker position with more negative travel and more available travel at an engineered spring curve specifically chosen for the full travel mode. Effectively, this technology gives you two bikes in one. No other system on the market provides this.

 

Twinloc - 1 lever, 3 settings


Full suspension bikes are commonly seen as assisting with descending. When it comes to racing, their real advantage lies not only in managing drops, rocks and roots; they are also a huge benefit when going through transitions and when mastering technical climbs. In XCO racing, descents make only a small time portion of the race. The largest proportion is spent on the climbs. When climbs are full of roots, rocks and tricky sections, the full suspension will help riders maintain traction and power delivery. The less energy wasted trying to save a mistake the more goes into going uphill quickly.

 

Spark-Twinloc.jpg

 

Our new platform has seen a major update in terms of suspension qual- ity thanks to the revised layout. We’ve achieved a huge improvement in suspension curves, and we’ve achieved the supple suspension and good end progression riders want to have on rough trails. In addition to that, the new Spark delivers good power transfer which will make it easy to punch up technical climbs.

 

However, in some situations, the best suspension can’t match with a fully locked rear triangle. That’s when SCOTT’s proprietary TwinLoc comes into play. We give the rider the option to fully lock their suspension when the trail demands. We o er the most efficient bike handling in any riding situation.

 

Scott Scale Twin lock out design.jpg

 

SCOTT ’s patented TwinLoc is still the only system on the market that con- trols damping and air volume to o er three distinct ride settings. With a flick of the thumb, you can be in Traction Mode on both the fork and shock, then quickly back to Lockout for climbs or Descend for the downs. For 2017, we have a new TwinLoc lever that is accessed under the handle- bar. This allows the lever to be placed on the left side, which allows more options for a dropper post and is great for the ever popular 1x drivetrain set up. This solution is protected, more versatile, and more ergonomic than ever.

 

System Integration


Internal cable routing


To provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame.

 

Scott Scale internal cable routing.jpg

 

The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut.

 

Scott Chainguide


Our integrated chain guide was developed in collaboration with the SCOTT ODLO MTB Racing Team.

 

Spark-Chainguide.jpg

 

The idea behind was to create a reliable component that helps to avoid dropping chains but that was light, versatile and integrated in the design of the frame. The new Spark chain guide weighs just 23 grams and is easy to assemble thanks to the smart assembly system and can accommodate chain rings from 30 to 36 teeth.

 

SW Dropouts

 

On the new Spark we’ve redesigned all the parts that can give us signifi- cant benefits in terms of performance and functionality.

 

On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new Spark dropouts are de- signed to be integrated on the thru-axle system thanks to a hollow tu- bular design that allows a simple and lightweight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the sti ness and avoids damage to the frame in case of impacts on the rear derailleur.

 

Axle tool


Working together with DT Swiss, we completely revisited the shape of the thru-axle lever to make it more ergonomic and to perfectly fit to our frame. Additionally we introduce a new multifunctional tool integrated on the inner part of the thru-axle itself. This 25T torx wrench is easy to reach and ready to be used for quick adjustments on the trails.

 

Garmin Mount


The integrated Garmin mount extends the reaches of integration into the realm of accessory products.

 

Stem-Garmin-3.jpg

 

Our goal was to create a computer mount solution for our bikes that is as seamless as it is sleek. We worked on a balanced, minimalist de- sign that secures a Garmin computer right where you need it while also making it unnoticeable when the trail requires your full attention. Easily added or removed with a single torx bolt, the Garmin mount comes in two sizes to guarantee a premium fit regardless of your choice of stem.

 

Geometry


We’ve brought the Spark up to date with our own interpretation of modern race bike geometry. By splitting the Spark family into three distinct models we were able to tailor specific geometry for a wide range of riders and applications. The family shares some fundamental characteristics which make every bike a Spark.

 

Scott Scale Geometry comparison.jpg

 

Control

 

We now have a slacker head angle and shorter stem lengths across the range for better high speed stability and direct steering control. Incorporating the Boost standard allowed us to build a shorter rear triangle for agile cornering. The reduction in chain stay length is especially significant on 29” models. At the same time as shortening the rear triangle, we’ve steepened the seat tube to balance weight distribution.

 

Fit

 

Thanks to our new frame design and shock placement standover clearance is improved and the frame’s center of gravity is lowered. Our racers want the lowest possible cockpit so we’ve given them the space to do so by minimizing stack height. Racers can now easily achieve their race fit on a 29” model. Trail riders can still use a taller stem and bar to suit their preference. Longer reaches combined with shorter stem mean riders can achieve their familiar cockpit fit.

 

Scott Scale RC geometry changes.jpg




64 Comments

Pure Savage, Jun 23 2016 03:21

Is it not a little strange that a marathon bike not have space for two bottles within the frame like cannondale and Spez?

 

While doing a new design the may have thought to sneak it in.

'Dale, Jun 23 2016 03:31

Is it not a little strange that a marathon bike not have space for two bottles within the frame like cannondale and Spez?

While doing a new design the may have thought to sneak it in.


Definitely strange...

Julian Howard-Tripp, Jun 23 2016 03:45

I think I am in love. Is it just me or are those super sexy?

BigToe, Jun 23 2016 03:46

Now that is a proper model update!!

Skott5, Jun 23 2016 03:49

But they did put in an inetrgrated garmin stem mount, that's a nice touch. 

BigD, Jun 23 2016 03:54

VERY nice, looks like loads of R&D, scared to see the price tags

FCH, Jun 23 2016 04:00

sexy machines. but I enjoyed this little snippet.

‘’In today's market it's getting easier for anyone to go to Asia and release a mediocre carbon hardtail frame and call it good. That`s where we are different. Focussing passionately on every little detail, no matter how small the gain is re- ally sets us apart from everybody else, and puts the new Scale firmly ahead of the competition.

Dan Roberts - Scott Engineer

KarlvN, Jun 23 2016 04:22

I nearly bought a new bike at the end of April, but a crash put paid to that idea...This may just have revived my ambitions once they are launched.

Koei, Jun 23 2016 04:29

So much yes! 
..so little money

Morwa, Jun 23 2016 04:49

There soon going to be a lot of "old" Sparks in the classifieds.....

Rick Sanchez, Jun 23 2016 04:51

Never really been a Scott fan, but I have just been converted

Krypt0n1te, Jun 23 2016 04:55

Ok, this throws a spanner in the works. Had my heart set on the Scalpel-Si Team, but think this is going to be better value for money.
Still chucking the fork and putting a lefty on.

Edit: Let me rather wait for official pricing before I make statements like that.

Sent from my SM-N910F using Tapatalk

nonky, Jun 23 2016 05:03

I'm so happy Giant has finally started making pretty bikes!

rock, Jun 23 2016 05:29

3 bottle cage screws? 

 

would be handy if you can fit a Spez swat box there.

Odinson, Jun 23 2016 05:37

Is it not a little strange that a marathon bike not have space for two bottles within the frame like cannondale and Spez?

 

While doing a new design the may have thought to sneak it in.

 

No. No it's not.

 

This whole two water bottle obsession is just good o'l SA marathon obsession BS. The designers had XC courses and trail riding in mind; not gravel grinding XCM.

 

You also don't just "sneak" something in like that. It takes a lot of design work to fit two water bottles in the front triangle of a dual susser, oftentimes to the detriment of suspension design.

 

I've never been a Scott fan, but that Spark looks hella nice and exactly what a modern XC bike should be.

CogitoErgoSum, Jun 23 2016 05:47

Very nice. Sure there is to be a 20% increase on the price tags for 2017 models...

Sent from my GT-I9505 using Tapatalk

CAAD4, Jun 23 2016 05:52

Nice chain keeper, pity the DT Swiss cheese is still there....

Krypt0n1te, Jun 23 2016 05:53

Very nice. Sure there is to be a 20% increase on the price tags for 2017 models...

Sent from my GT-I9505 using Tapatalk

Does anyone know the retail for the current Spark 900 RC?

Sent from my SM-N910F using Tapatalk

Skott5, Jun 23 2016 06:14

This would be my choice ..

 

p5pb13633433.jpg

J trailx, Jun 23 2016 07:31

Turn back shock around put giant sticker on it...

J trailx, Jun 23 2016 07:33

I'm liking the plus bike.....

lechatnoir, Jun 23 2016 07:43

well, i'm not going to need the photograph of Hillary Clinton tonight after all!!! 

 

:-}

Hermanus Cycles, Jun 23 2016 07:44

So they dropped their old suspension design for something that resembles GIANT Anthem and Trance.

BrandonF_, Jun 23 2016 08:01

So they dropped their old suspension design for something that resembles GIANT Anthem and Trance.


....more BMC (Shitter to match ABS's credentials....#maybe)

Captain Fastbastard Mayhem, Jun 23 2016 08:23

Turn back shock around put giant sticker on it...

 

 

So they dropped their old suspension design for something that resembles GIANT Anthem and Trance.

nope and nope. Still a strict single pivot design. Giant and others like it are a DW link design, which means there's an extra linkage between the front and rear triangle. 

 

TOTALLY different design altogether.