Shimano goes 12-speed with all-new XTR groupset

Shimano has gone 12-speed with their brand new XTR M9100 series groupset. The latest generation XTR features a completely new drivetrain, 2- or 4-piston brake options, an XTR dropper post lever with some weight savings to boot.

Now 12-speed, the new XTR cassette is available as a 10-51T for a massive range and a 10-45T for faster terrain, smaller changes in rider cadence, and some weight savings.

 

To squeeze the 12 gears and 10 tooth sprocket onto the rear hub, Shimano engineers developed the Micro Spline freehub. The hub is also now driven by a ratchet system, rather than pawls which promises silent freewheeling. The largest cassette option is specifically built for 1x cranksets but 2x riders don’t despair, there will also be a dual chainring crankset (38-28T) that pairs with the smaller 10-45T cassette.

 

The XTR shifters use a new I-SPEC-EV design for mounting controls neatly on the handlebar, which can now include an XTR dropper post lever. The XTR brakes also see a redesigned lever, clamp body, and calliper shape. The new caliper shape means a new brake pad shape. The brakes will be available in a 2-piston (lighter XC focussed) or a 4-piston configuration.

 

For all the details on Shimano XTR M9100, read the press release and weight comparison table below.

 

XTR_M9100_1x12_XC_OP_zz_zz_zz_zz_zz_zz_img1.jpg

 

Press Release


If there’s one thing certain in life it’s that the MTB world continues to push boundaries. Mountain bike racing develops year on year with courses becoming more demanding and bikes becoming more capable. Whether riders need the lightest set up, the most control over their bikes or the most versatile drivetrain for any situation, new XTR has taken that development challenge further than ever with a host of component developments to give MTB racers the speed, focus and control for victory.

 

xtr_m9100-13.jpg

 

XC, Marathon and Enduro racers demand a fine balance of speed, focus and control so each has been analysed and optimized in the development of SHIMANO’s XTR M9100 Series.

 

New XTR features a groundbreaking 12-speed cassette with either a 10-45T or 10-51T range, 2- or 4-piston brakes, and a new hub featuring SHIMANO’s new MICRO SPLINE technology. As well as that comes a new design of brake and lever mounts allowing riders to position their controls, including an XTR dropper post lever, in the optimum position for comfort and rapid action. Altogether the new developments save over 150g in weight for XC rider or over 90g for Enduro riders and promise a more intuitive shifting set up for enhanced focus on the trail.

 

Speed, focus and control were the words we lived by during the development phase. We’ve designed new XTR to enhance acceleration and speed by drastically cutting the loss of driving force with a re-designed drivetrain. We allow for precision focus with an intuitive handlebar set up and pin-point control comes with new brake solutions. New XTR is not an update of M9000, it’s a re-design from the ground up to find the best components for MTB racing for XC, Marathon and Enduro racing. Bas Van Dooren, Shimano Europe Product team leader

Cassette


CS-M9100-12_zz_zz_10-51_zz_zz_zz_S1.jpg12 Speed / 10-51: "For the trail rider to climb every mountain they face"
CS-M9100-12_zz_zz_10-45_zz_zz_zz_S1.jpg12 Speed 10-45: "For XC riders wanting small gear steps and the lightest set up"

Developments in the drivetrain started from the position of minimizing gear change steps to give riders the optimum rhythm and cadence between each gear and ultimately the most overall speed. The result of this was the 51T sprocket, which comes after equal gear steps of 6T in the last three sprockets (10-12-14-16-18-21-24-28-33-39-45-51T) for an even cadence. XTR also introduces a 10-45T 12-speed cassette (10-12-14-16-18-21-24-28-32-36-40-45T) for faster or less steep MTB courses and less cadence shock. The 10-45T (CS-M9100-12) is for XC riders wanting small gear steps and the lightest set up, the 10-51T (CS-M9100-12) is for the trail rider to climb every mountain they face.

 

Both cassettes use strikingly different metals for different sprockets to allow the best balance of weight and durability. The largest sprockets use aluminium, the middle use titanium and the smallest use steel.

 

CS-M9100-12_zz_zz_10-51_zz_zz_zz_S2.jpg

 

A third cassette option (CS-M9110-11) comes with new XTR for riders specifically looking to create a stiffer and lighter wheel set. Essentially this option is based on the 10-51T cassette with the 51T sprocket removed to create an 11-speed cassette with 12-speed gear spacing. The benefit of this option is that it gives riders the chance to create a lighter bike and stiffer wheels which can be used with the same chain and shifter that the 12-speed set-up uses.

 

xtr_m9100-4.jpg

 

Hub tech


To fit the 12-speed set up SHIMANO restructured the FREEHUB design with what’s known as MICRO SPLINE technology to fit the cassette. As well as that comes the introduction of SCYLENCE technology in Shimano’s rear hub. This new technology replaces the pawls with a ratchet system to reduce drag whilst coasting and create a virtually silent hub so you can focus more on the trail ahead. Front hubs are available in 100 or 110 mm spacing with a 15 mm thru-axle and rear hubs come in 142 or 148mm (Boost specification) with a 12 mm thru-axle (HB-M9110/-B / FH-M9110/-B).

 

FH-M9110-BS_zz_zz_zz_zz_zz_zz_S1.jpg
HB-M9110-BS_zz_zz_zz_zz_zz_zz_S1.jpg
FH-M9110-B_zz_R_zz_zz_zz_zz_S1.jpg
HB-M9110-B_zz_zz_zz_zz_zz_zz_S1.jpg

Crankset


FC-M9100-1_zz_zz_36_zz_zz_zz_S1.jpg
FC-M9100-2_zz_zz_38-28_zz_zz_zz_S1.jpg

Alongside a dedicated 12-speed chain (CN-M9100) with a 12-speed QUICK LINK comes a 12-speed crankset (FC-M9100/M9120-1) with that famous hollow crank arm. XC 1x12-speed riders are well catered for with a wide range of direct mount chainrings saving up to 80 g in weight and available from 30T-38T. Enduro riders running 1x12-speed can add the XTR chain device (SM-CD800 E mount, D mount or ISCG05 type) to aid chain retention and they have the option of the FC-M9120 crankset with a wider Q-factor to fit particular frame dimensions.

 

Riders who want the biggest gear range and control in all types of terrain have the option of a 2x12-speed crankset (FC-M9100/M9120-B2) in 38-28T that can be paired with the 10-45T cassette for the maximum gear range and close gear steps for long races with lots of climbing.

 

FC-M9120-B2_zz_zz_34_zz_zz_zz_img1.jpg

 

Derailleurs


RD-M9100-GS_zz_zz_zz_zz_zz_zz_S1.jpg
RD-M9100-SGS_zz_zz_zz_zz_zz_zz_S1.jpg
RD-M9120-SGS_zz_zz_zz_zz_zz_zz_S1.jpg

Three rear derailleurs are available at XTR level (the RD-M9100-SGS/GS long cage or short cage style or the RD-M9120-SGS double chainring long cage style), all with a sleek, aggressive and angular anodized aluminium design. To aid shifting performance the pulley wheels go from 11T at XTR M9000 to a larger 13T size to increase chain retention and together with the rear derailleur’s SHIMANO SHADOW RD+ design, helps minimize chain bounce.

 

Meanwhile, the front derailleur is also available in three different styles depending on your frame. The D-type, E-type and M-type mounts all feature SIDE SWING technology for effortlessly smooth front shifting.

 

FD-M9100-M_zz_zz_zz_zz_zz_zz_S1.jpg
FD-M9100-E_zz_zz_zz_zz_zz_zz_S1.jpg
FD-M9100-D_zz_zz_zz_zz_zz_zz_S1.jpg

SHIFT OF FOCUS


xtr_m9100-17.jpg

 

Shifters


The theory behind the shifter design was to allow riders to instantly adapt to rapidly changing conditions with improved cockpit integration for shave crucial tenths of seconds from each operation. That has been achieved through the creation of an I-SPEC EV design, which is the system by which handlebar controls can be mounted together. The new I-SPEC-EV designs give 14 mm of lateral sliding range and 60 degrees of rotational positioning so riders can find their most ergonomic hand position on the shifters and levers and have clutter-free handlebars.

 

SL-M9100-R_R_zz_zz_zz_zz_zz_S1.jpg
SL-M9100-L_L_zz_zz_zz_zz_zz_S1.jpg
SL-M9100-IR_R_zz_zz_zz_zz_zz_S1.jpg
SL-M9100-IL_L_zz_zz_zz_zz_zz_S1.jpg

As well as that, Shimano now introduces a dedicated dropper seat post lever (SL-MT800-IL) with an I-SPEC-EV mount that’s compatible with all common adjustable seat post types in the market including the PRO Koryak Dropper post.

 

xtr_m9100-19.jpg

 

In addition, the shifters now have a lighter operation force allowing riders to make intuitive, seamless and minimum fingertip movements, bringing a substantial decrease in shifting force and operation compared to XTR M9000.

 

Features like RAPIDFIRE Plus, 2-WAY RELEASE and MULTI-RELEASE carry over from the previous generation. New for the M9100 shifters though is an 11-to-12-speed converter (SL-M9100-R/-IR) on the rear shifter for riders choosing the ‘11-speed’ wider flange hub set-up. For 2x12 riders the front left-hand shifter (SL-M9100-IL / SL-M9100-L) features an innovative new Mono Lever design with a simplified and intuitive operation, using just the one lever to shift up or shift down.

 

2019-XTR_zz_zz_zz_zz_zz_zz_img11.jpg

 

REMAIN IN CONTROL


Brakes


BR-M9100_zz_F_zz_zz_zz_zz_S1.jpg
BL-M9100_R_zz_zz_zz_zz_zz_S1.jpg
BL-M9100_L_zz_zz_zz_zz_zz_S1.jpg
The 2-piston (BR-M9100) option comes with a lighter weight XC brake lever with the option to adjust the reach of the lever arm.
Building on what are already the standard to which all other brakes aspire to be, the design of XTR M9100 brake lever (BL-M9100/M9120) has changed with a repositioned clamp band and lever body. The clamp moves towards the middle of the lever body and the edge of the lever body is cleverly braced against the handlebar to create a stiffer brake with more direct contact feeling and improvement in control.

 

2019-XTR_zz_zz_zz_zz_zz_zz_img3.jpg

 

The 2-piston (BR-M9100) option comes with a lighter weight XC brake lever with the option to adjust the reach of the lever arm. The 4-piston brakeset (BR-M9120) also features a dedicated brake lever but with a tool-free reach adjust function, free stroke adjust function and Shimano’s Servo Wave technology to give rapid pad-to-rotor action. Both calipers are made from aluminium, use a high rigidity brake hose and provide faster brake engagement with a shorter free stroke.

 

BR-M9120_zz_F_zz_zz_zz_zz_S1.jpg
BL-M9120_R_zz_zz_zz_zz_zz_S1.jpg
BL-M9120_L_zz_zz_zz_zz_zz_S1.jpg
The 4-piston brakeset (BR-M9120) also features a dedicated brake lever but with a tool-free reach adjust function, free stroke adjust function and Shimano’s Servo Wave technology to give rapid pad-to-rotor action.

Pads and rotors



RT-MT900_zz_zz_zz_zz_zz_zz_S1.jpg

N03Aresinpad_zz_zz_zz_zz_zz_zz_S1.jpg

K04S_METAL_S1.jpg


To match the redesigned caliper shape the brake pad shape also changes. Riders choosing the 4-piston caliper need the radiator finned pads (N03/4A resin/metal), whilst the 2-piston calipers fit the pads without fins (K02/4S resin/metal, with optional K02/4Ti Titanium backing plates). The rotor design meanwhile uses a revamped ICE-TECHNOLOGIES FREEZA construction to either reduce weight or boost heat dissipation. The 140 and 160mm rotors shed 5 and 10g respectively, whilst the 180 and 203 mm rotors were 20 °c cooler during testing with the 203 mm rotor also saving 30 g (vs RT99) in weight.

 

SECOND TO NONE


All together new XTR M9100 answers the questions the world’s best mountain bike racers are asking. How can I combine lightweight riding efficiency with the widest range of gears, maximum braking power, personalized set up, excellent component durability and supreme drivetrain efficiency? XTR M9100: second to none.

 

xtr_m9100-11.jpg

 

Weight Comparison


The table below provides a weight comparison between the new generation XTR M9100 and the previous XTR M9000

 

Shimano XTR M9100 (12 speed)

  • Controls
  • SL-M9100-L79 g
  • SL-M9100-R121 g
  • SL-M9100-IL74 g
  • SL-M9100-IR117 g
  • Drivetrain
  • FC-M9100-1511 g (32T)
  • FC-M9100-2592 g (38-28T)
  • CS-M9100-12359 g (10-51T)
  • CS-M9100-12349 g (10-45T)
  • CS-M9100-11299 g (10-45T)
  • CN-M9100242 g
  • Derailleur
  • FD-M9100-D/E88 g
  • RD-M9100-GS237 g (GS)
  • RD-M9100-SGS240 g
  • Brakeset
  • BR-M9100312 g
  • BL-M9100312 g
  • BR-M9120385 g
  • BL-M9120385 g
  • RT-M900149 g (203mm), 133 g (180mm), 108 g (160 mm), 90 g (140 mm)
  • Hubs
  • HB-M9110-B138 g
  • FH-M9110-B231 g

Shimano XTR M9000 (11 speed)

  • Controls
  • SL-M9000-L205 g (pair)
  • SL-M9000-R205 g (pair)
  • SL-M9000-IL200 g (pair)
  • SL-M9000-IR200 g (pair)
  • Drivetrain
  • FC-M9000-1598 g (32T)
  • FC-M9000-2649 g (38-28T)
  • CS-M9001330 g (11-40T)
  • --
  • --
  • CN-901-11247 g
  • Derailleur
  • FD-M9000-E102 g
  • RD-M9000-GS221g (GS)
  • RD-M9000-SGS224 g (SGS)
  • Brakeset
  • BR-M9000316 g
  • BL-M9000316 g
  • BR-M9020360 g
  • BL-M9020360 g
  • SM-RT99173 g (203mm) 132.3 g (180mm) 118.1 g (160mm)
  • Hubs
  • HB-M9010-B155 g
  • FH-M9010-B277 g




20 Comments

Onegear, May 25 2018 06:15

Who wants silent free wheeling?

Schnavel, May 25 2018 06:41

Who wants silent free wheeling?

Agreed! Sounds awful.

 

Also, the way I read the article, only Shimano XTR hubs will be able to run the new freewheel body due to the ratchet system - do we really need another freebody standard? I guess manufactures will follow suit and provide freehubs for their wheels in a similar fashion to the XD driver, or is this system patented? 

Hilton., May 25 2018 07:11

Agreed! Sounds awful.

 

Also, the way I read the article, only Shimano XTR hubs will be able to run the new freewheel body due to the ratchet system - do we really need another freebody standard? I guess manufactures will follow suit and provide freehubs for their wheels in a similar fashion to the XD driver, or is this system patented? 

 

In other articles I've read, the new Shimano freehub system (Micro spline) is a closed system, unlike how the Sram XD driver is open. Apparently, the only other company that Shimano gave the rights to make a compatible hub is DT Swiss. This is really a poor move I think, to lock in customers.

 

So we won't get aftermarket cassettes for this XTR, unless they use another hub standard, like the XD driver or the Oneup/Hope shark thing.

 

Personally, I quite like the idea of a silent hub.

Grease_Monkey, May 25 2018 07:25

Finaly!

Too bad the freehubs won't be available aftermarket - lost me as a customer right there - I want the angry hornett sound of my Hope Hubs following me down the trail!

nox1111, May 25 2018 07:42

So much want!

TheJ, May 25 2018 09:34

Should have use the XD standard.

Dorpie, May 25 2018 09:43

I'm just surprised they finally came to the party with a 10spd cog and direct mount cranks.

Mongoose!, May 26 2018 11:10

Nice BMC repainted frame

Traveler, May 26 2018 08:11

It is pretty looking.

GiantSpez, May 27 2018 06:36

Nice. But glad I rather chose sram eagle.

PygaSchmyga, May 28 2018 07:07

too little, too late on the 12-speed, especially with a new free hub system. 

 

The brakes are very nice looking

Headshot, May 28 2018 10:42

too little, too late on the 12-speed, especially with a new free hub system. 

 

The brakes are very nice looking

 

 

"Too late" ?!? - you jest surely. They will score high end OEM business on this groupset and the XT and SLX versions will come a bit later. Also I cant see what the problem is with using their own hub system. What's stopping Sunrace making a cheap compatible 12s cassette as they have for SRAM?

Bos, May 28 2018 10:56

Give the industry 3 months and someone will come up with a XTR compatable freehub for hope/AM classic/king etc which sidesteps the Shimano patents. 

bradwentzel, May 28 2018 01:36

Can you use and eagle cassette with it? Mmm... 

Iwan Kemp, May 28 2018 01:44

Can you use and eagle cassette with it? Mmm... 

 

Honest question: Why would you want to? I understand wanting to avoid buying a new hub, but just trying to understand why then not just go all-in Eagle? What is it you're trying to avoid or gain?

bradwentzel, May 28 2018 02:08

Honest question: Why would you want to? I understand wanting to avoid buying a new hub, but just trying to understand why then not just go all-in Eagle? What is it you're trying to avoid or gain?

 

Real nice set of XD driver wheels. 

Non Shimano hubs.

 

Wondering on gear spacing/cross compatability for Eagle vs New XTR vs Sunrace etc

Wicked Components, May 28 2018 09:11

Can you use and eagle cassette with it? Mmm... 

Nope, different freehub standard

Wicked Components, May 28 2018 09:14

"A third cassette option (CS-M9110-11) comes with new XTR for riders specifically looking to create a stiffer and lighter wheel set. Essentially this option is based on the 10-51T cassette with the 51T sprocket removed to create an 11-speed cassette with 12-speed gear spacing. The benefit of this option is that it gives riders the chance to create a lighter bike and stiffer wheels which can be used with the same chain and shifter that the 12-speed set-up uses."

 

How will an 11 speed casette with 12 speed spacing result in stiffer wheels and a lighter bike??

Jehosefat, May 28 2018 10:29

How will an 11 speed casette with 12 speed spacing result in stiffer wheels and a lighter bike??

 

Well, lighter because 1 less (massive) cog at the back and stiffer wheels because the hub itself is slightly wider (due to the missing cog) making the rear wheel less dished and therefore stiffer (similar to the theory behind the boost standard).

dirtypot, May 29 2018 08:06

After feeling the new XTR derailleur last night, I can say that Shimano has definitely upped their game!  It's a thing of beauty and is incredibly light.  
One of the guys from Shimano said they're expecting to sell more shifter/RD combo's than complete drivetrains due to the new hub/freebody standard.  So even they are expecting people to mix and match cassettes from SRAM and Sunrace.